Built motion from commit 6a09e18b.|2.6.11
[motion2.git] / legacy-libs / grpc-cloned / deps / grpc / third_party / abseil-cpp / absl / base / dynamic_annotations.h
1 /*
2  *  Copyright 2017 The Abseil Authors.
3  *
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at
7  *
8  *      https://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16 /* This file defines dynamic annotations for use with dynamic analysis
17    tool such as valgrind, PIN, etc.
18
19    Dynamic annotation is a source code annotation that affects
20    the generated code (that is, the annotation is not a comment).
21    Each such annotation is attached to a particular
22    instruction and/or to a particular object (address) in the program.
23
24    The annotations that should be used by users are macros in all upper-case
25    (e.g., ANNOTATE_THREAD_NAME).
26
27    Actual implementation of these macros may differ depending on the
28    dynamic analysis tool being used.
29
30    This file supports the following configurations:
31    - Dynamic Annotations enabled (with static thread-safety warnings disabled).
32      In this case, macros expand to functions implemented by Thread Sanitizer,
33      when building with TSan. When not provided an external implementation,
34      dynamic_annotations.cc provides no-op implementations.
35
36    - Static Clang thread-safety warnings enabled.
37      When building with a Clang compiler that supports thread-safety warnings,
38      a subset of annotations can be statically-checked at compile-time. We
39      expand these macros to static-inline functions that can be analyzed for
40      thread-safety, but afterwards elided when building the final binary.
41
42    - All annotations are disabled.
43      If neither Dynamic Annotations nor Clang thread-safety warnings are
44      enabled, then all annotation-macros expand to empty. */
45
46 #ifndef ABSL_BASE_DYNAMIC_ANNOTATIONS_H_
47 #define ABSL_BASE_DYNAMIC_ANNOTATIONS_H_
48
49 #ifndef DYNAMIC_ANNOTATIONS_ENABLED
50 # define DYNAMIC_ANNOTATIONS_ENABLED 0
51 #endif
52
53 #if DYNAMIC_ANNOTATIONS_ENABLED != 0
54
55   /* -------------------------------------------------------------
56      Annotations that suppress errors.  It is usually better to express the
57      program's synchronization using the other annotations, but these can
58      be used when all else fails. */
59
60   /* Report that we may have a benign race at "pointer", with size
61      "sizeof(*(pointer))". "pointer" must be a non-void* pointer.  Insert at the
62      point where "pointer" has been allocated, preferably close to the point
63      where the race happens.  See also ANNOTATE_BENIGN_RACE_STATIC. */
64   #define ANNOTATE_BENIGN_RACE(pointer, description) \
65     AnnotateBenignRaceSized(__FILE__, __LINE__, pointer, \
66                             sizeof(*(pointer)), description)
67
68   /* Same as ANNOTATE_BENIGN_RACE(address, description), but applies to
69      the memory range [address, address+size). */
70   #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) \
71     AnnotateBenignRaceSized(__FILE__, __LINE__, address, size, description)
72
73   /* Enable (enable!=0) or disable (enable==0) race detection for all threads.
74      This annotation could be useful if you want to skip expensive race analysis
75      during some period of program execution, e.g. during initialization. */
76   #define ANNOTATE_ENABLE_RACE_DETECTION(enable) \
77     AnnotateEnableRaceDetection(__FILE__, __LINE__, enable)
78
79   /* -------------------------------------------------------------
80      Annotations useful for debugging. */
81
82   /* Report the current thread name to a race detector. */
83   #define ANNOTATE_THREAD_NAME(name) \
84     AnnotateThreadName(__FILE__, __LINE__, name)
85
86   /* -------------------------------------------------------------
87      Annotations useful when implementing locks.  They are not
88      normally needed by modules that merely use locks.
89      The "lock" argument is a pointer to the lock object. */
90
91   /* Report that a lock has been created at address "lock". */
92   #define ANNOTATE_RWLOCK_CREATE(lock) \
93     AnnotateRWLockCreate(__FILE__, __LINE__, lock)
94
95   /* Report that a linker initialized lock has been created at address "lock".
96    */
97 #ifdef THREAD_SANITIZER
98   #define ANNOTATE_RWLOCK_CREATE_STATIC(lock) \
99     AnnotateRWLockCreateStatic(__FILE__, __LINE__, lock)
100 #else
101   #define ANNOTATE_RWLOCK_CREATE_STATIC(lock) ANNOTATE_RWLOCK_CREATE(lock)
102 #endif
103
104   /* Report that the lock at address "lock" is about to be destroyed. */
105   #define ANNOTATE_RWLOCK_DESTROY(lock) \
106     AnnotateRWLockDestroy(__FILE__, __LINE__, lock)
107
108   /* Report that the lock at address "lock" has been acquired.
109      is_w=1 for writer lock, is_w=0 for reader lock. */
110   #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) \
111     AnnotateRWLockAcquired(__FILE__, __LINE__, lock, is_w)
112
113   /* Report that the lock at address "lock" is about to be released. */
114   #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) \
115     AnnotateRWLockReleased(__FILE__, __LINE__, lock, is_w)
116
117 #else  /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */
118
119   #define ANNOTATE_RWLOCK_CREATE(lock) /* empty */
120   #define ANNOTATE_RWLOCK_CREATE_STATIC(lock) /* empty */
121   #define ANNOTATE_RWLOCK_DESTROY(lock) /* empty */
122   #define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) /* empty */
123   #define ANNOTATE_RWLOCK_RELEASED(lock, is_w) /* empty */
124   #define ANNOTATE_BENIGN_RACE(address, description) /* empty */
125   #define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) /* empty */
126   #define ANNOTATE_THREAD_NAME(name) /* empty */
127   #define ANNOTATE_ENABLE_RACE_DETECTION(enable) /* empty */
128
129 #endif  /* DYNAMIC_ANNOTATIONS_ENABLED */
130
131 /* These annotations are also made available to LLVM's Memory Sanitizer */
132 #if DYNAMIC_ANNOTATIONS_ENABLED == 1 || defined(MEMORY_SANITIZER)
133   #define ANNOTATE_MEMORY_IS_INITIALIZED(address, size) \
134     AnnotateMemoryIsInitialized(__FILE__, __LINE__, address, size)
135
136   #define ANNOTATE_MEMORY_IS_UNINITIALIZED(address, size) \
137     AnnotateMemoryIsUninitialized(__FILE__, __LINE__, address, size)
138 #else
139   #define ANNOTATE_MEMORY_IS_INITIALIZED(address, size) /* empty */
140   #define ANNOTATE_MEMORY_IS_UNINITIALIZED(address, size) /* empty */
141 #endif  /* DYNAMIC_ANNOTATIONS_ENABLED || MEMORY_SANITIZER */
142
143 /* TODO(delesley) -- Replace __CLANG_SUPPORT_DYN_ANNOTATION__ with the
144    appropriate feature ID. */
145 #if defined(__clang__) && (!defined(SWIG)) \
146     && defined(__CLANG_SUPPORT_DYN_ANNOTATION__)
147
148   #if DYNAMIC_ANNOTATIONS_ENABLED == 0
149     #define ANNOTALYSIS_ENABLED
150   #endif
151
152   /* When running in opt-mode, GCC will issue a warning, if these attributes are
153      compiled. Only include them when compiling using Clang. */
154   #define ATTRIBUTE_IGNORE_READS_BEGIN \
155       __attribute((exclusive_lock_function("*")))
156   #define ATTRIBUTE_IGNORE_READS_END \
157       __attribute((unlock_function("*")))
158 #else
159   #define ATTRIBUTE_IGNORE_READS_BEGIN  /* empty */
160   #define ATTRIBUTE_IGNORE_READS_END  /* empty */
161 #endif  /* defined(__clang__) && ... */
162
163 #if (DYNAMIC_ANNOTATIONS_ENABLED != 0) || defined(ANNOTALYSIS_ENABLED)
164   #define ANNOTATIONS_ENABLED
165 #endif
166
167 #if (DYNAMIC_ANNOTATIONS_ENABLED != 0)
168
169   /* Request the analysis tool to ignore all reads in the current thread
170      until ANNOTATE_IGNORE_READS_END is called.
171      Useful to ignore intentional racey reads, while still checking
172      other reads and all writes.
173      See also ANNOTATE_UNPROTECTED_READ. */
174   #define ANNOTATE_IGNORE_READS_BEGIN() \
175     AnnotateIgnoreReadsBegin(__FILE__, __LINE__)
176
177   /* Stop ignoring reads. */
178   #define ANNOTATE_IGNORE_READS_END() \
179     AnnotateIgnoreReadsEnd(__FILE__, __LINE__)
180
181   /* Similar to ANNOTATE_IGNORE_READS_BEGIN, but ignore writes instead. */
182   #define ANNOTATE_IGNORE_WRITES_BEGIN() \
183     AnnotateIgnoreWritesBegin(__FILE__, __LINE__)
184
185   /* Stop ignoring writes. */
186   #define ANNOTATE_IGNORE_WRITES_END() \
187     AnnotateIgnoreWritesEnd(__FILE__, __LINE__)
188
189 /* Clang provides limited support for static thread-safety analysis
190    through a feature called Annotalysis. We configure macro-definitions
191    according to whether Annotalysis support is available. */
192 #elif defined(ANNOTALYSIS_ENABLED)
193
194   #define ANNOTATE_IGNORE_READS_BEGIN() \
195     StaticAnnotateIgnoreReadsBegin(__FILE__, __LINE__)
196
197   #define ANNOTATE_IGNORE_READS_END() \
198     StaticAnnotateIgnoreReadsEnd(__FILE__, __LINE__)
199
200   #define ANNOTATE_IGNORE_WRITES_BEGIN() \
201     StaticAnnotateIgnoreWritesBegin(__FILE__, __LINE__)
202
203   #define ANNOTATE_IGNORE_WRITES_END() \
204     StaticAnnotateIgnoreWritesEnd(__FILE__, __LINE__)
205
206 #else
207   #define ANNOTATE_IGNORE_READS_BEGIN()  /* empty */
208   #define ANNOTATE_IGNORE_READS_END()  /* empty */
209   #define ANNOTATE_IGNORE_WRITES_BEGIN()  /* empty */
210   #define ANNOTATE_IGNORE_WRITES_END()  /* empty */
211 #endif
212
213 /* Implement the ANNOTATE_IGNORE_READS_AND_WRITES_* annotations using the more
214    primitive annotations defined above. */
215 #if defined(ANNOTATIONS_ENABLED)
216
217   /* Start ignoring all memory accesses (both reads and writes). */
218   #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() \
219     do {                                           \
220       ANNOTATE_IGNORE_READS_BEGIN();               \
221       ANNOTATE_IGNORE_WRITES_BEGIN();              \
222     }while (0)
223
224   /* Stop ignoring both reads and writes. */
225   #define ANNOTATE_IGNORE_READS_AND_WRITES_END()   \
226     do {                                           \
227       ANNOTATE_IGNORE_WRITES_END();                \
228       ANNOTATE_IGNORE_READS_END();                 \
229     }while (0)
230
231 #else
232   #define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN()  /* empty */
233   #define ANNOTATE_IGNORE_READS_AND_WRITES_END()  /* empty */
234 #endif
235
236 /* Use the macros above rather than using these functions directly. */
237 #include <stddef.h>
238 #ifdef __cplusplus
239 extern "C" {
240 #endif
241 void AnnotateRWLockCreate(const char *file, int line,
242                           const volatile void *lock);
243 void AnnotateRWLockCreateStatic(const char *file, int line,
244                           const volatile void *lock);
245 void AnnotateRWLockDestroy(const char *file, int line,
246                            const volatile void *lock);
247 void AnnotateRWLockAcquired(const char *file, int line,
248                             const volatile void *lock, long is_w);  /* NOLINT */
249 void AnnotateRWLockReleased(const char *file, int line,
250                             const volatile void *lock, long is_w);  /* NOLINT */
251 void AnnotateBenignRace(const char *file, int line,
252                         const volatile void *address,
253                         const char *description);
254 void AnnotateBenignRaceSized(const char *file, int line,
255                         const volatile void *address,
256                         size_t size,
257                         const char *description);
258 void AnnotateThreadName(const char *file, int line,
259                         const char *name);
260 void AnnotateEnableRaceDetection(const char *file, int line, int enable);
261 void AnnotateMemoryIsInitialized(const char *file, int line,
262                                  const volatile void *mem, size_t size);
263 void AnnotateMemoryIsUninitialized(const char *file, int line,
264                                    const volatile void *mem, size_t size);
265
266 /* Annotations expand to these functions, when Dynamic Annotations are enabled.
267    These functions are either implemented as no-op calls, if no Sanitizer is
268    attached, or provided with externally-linked implementations by a library
269    like ThreadSanitizer. */
270 void AnnotateIgnoreReadsBegin(const char *file, int line)
271     ATTRIBUTE_IGNORE_READS_BEGIN;
272 void AnnotateIgnoreReadsEnd(const char *file, int line)
273     ATTRIBUTE_IGNORE_READS_END;
274 void AnnotateIgnoreWritesBegin(const char *file, int line);
275 void AnnotateIgnoreWritesEnd(const char *file, int line);
276
277 #if defined(ANNOTALYSIS_ENABLED)
278 /* When Annotalysis is enabled without Dynamic Annotations, the use of
279    static-inline functions allows the annotations to be read at compile-time,
280    while still letting the compiler elide the functions from the final build.
281
282    TODO(delesley) -- The exclusive lock here ignores writes as well, but
283    allows IGNORE_READS_AND_WRITES to work properly. */
284 #pragma GCC diagnostic push
285 #pragma GCC diagnostic ignored "-Wunused-function"
286 static inline void StaticAnnotateIgnoreReadsBegin(const char *file, int line)
287     ATTRIBUTE_IGNORE_READS_BEGIN { (void)file; (void)line; }
288 static inline void StaticAnnotateIgnoreReadsEnd(const char *file, int line)
289     ATTRIBUTE_IGNORE_READS_END { (void)file; (void)line; }
290 static inline void StaticAnnotateIgnoreWritesBegin(
291     const char *file, int line) { (void)file; (void)line; }
292 static inline void StaticAnnotateIgnoreWritesEnd(
293     const char *file, int line) { (void)file; (void)line; }
294 #pragma GCC diagnostic pop
295 #endif
296
297 /* Return non-zero value if running under valgrind.
298
299   If "valgrind.h" is included into dynamic_annotations.cc,
300   the regular valgrind mechanism will be used.
301   See http://valgrind.org/docs/manual/manual-core-adv.html about
302   RUNNING_ON_VALGRIND and other valgrind "client requests".
303   The file "valgrind.h" may be obtained by doing
304      svn co svn://svn.valgrind.org/valgrind/trunk/include
305
306   If for some reason you can't use "valgrind.h" or want to fake valgrind,
307   there are two ways to make this function return non-zero:
308     - Use environment variable: export RUNNING_ON_VALGRIND=1
309     - Make your tool intercept the function RunningOnValgrind() and
310       change its return value.
311  */
312 int RunningOnValgrind(void);
313
314 /* ValgrindSlowdown returns:
315     * 1.0, if (RunningOnValgrind() == 0)
316     * 50.0, if (RunningOnValgrind() != 0 && getenv("VALGRIND_SLOWDOWN") == NULL)
317     * atof(getenv("VALGRIND_SLOWDOWN")) otherwise
318    This function can be used to scale timeout values:
319    EXAMPLE:
320    for (;;) {
321      DoExpensiveBackgroundTask();
322      SleepForSeconds(5 * ValgrindSlowdown());
323    }
324  */
325 double ValgrindSlowdown(void);
326
327 #ifdef __cplusplus
328 }
329 #endif
330
331 /* ANNOTATE_UNPROTECTED_READ is the preferred way to annotate racey reads.
332
333      Instead of doing
334         ANNOTATE_IGNORE_READS_BEGIN();
335         ... = x;
336         ANNOTATE_IGNORE_READS_END();
337      one can use
338         ... = ANNOTATE_UNPROTECTED_READ(x); */
339 #if defined(__cplusplus) && defined(ANNOTATIONS_ENABLED)
340 template <typename T>
341 inline T ANNOTATE_UNPROTECTED_READ(const volatile T &x) { /* NOLINT */
342   ANNOTATE_IGNORE_READS_BEGIN();
343   T res = x;
344   ANNOTATE_IGNORE_READS_END();
345   return res;
346   }
347 #else
348   #define ANNOTATE_UNPROTECTED_READ(x) (x)
349 #endif
350
351 #if DYNAMIC_ANNOTATIONS_ENABLED != 0 && defined(__cplusplus)
352   /* Apply ANNOTATE_BENIGN_RACE_SIZED to a static variable. */
353   #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description)        \
354     namespace {                                                       \
355       class static_var ## _annotator {                                \
356        public:                                                        \
357         static_var ## _annotator() {                                  \
358           ANNOTATE_BENIGN_RACE_SIZED(&static_var,                     \
359                                       sizeof(static_var),             \
360             # static_var ": " description);                           \
361         }                                                             \
362       };                                                              \
363       static static_var ## _annotator the ## static_var ## _annotator;\
364     }  // namespace
365 #else /* DYNAMIC_ANNOTATIONS_ENABLED == 0 */
366   #define ANNOTATE_BENIGN_RACE_STATIC(static_var, description)  /* empty */
367 #endif /* DYNAMIC_ANNOTATIONS_ENABLED */
368
369 #ifdef ADDRESS_SANITIZER
370 /* Describe the current state of a contiguous container such as e.g.
371  * std::vector or std::string. For more details see
372  * sanitizer/common_interface_defs.h, which is provided by the compiler. */
373 #include <sanitizer/common_interface_defs.h>
374 #define ANNOTATE_CONTIGUOUS_CONTAINER(beg, end, old_mid, new_mid) \
375   __sanitizer_annotate_contiguous_container(beg, end, old_mid, new_mid)
376 #define ADDRESS_SANITIZER_REDZONE(name)         \
377   struct { char x[8] __attribute__ ((aligned (8))); } name
378 #else
379 #define ANNOTATE_CONTIGUOUS_CONTAINER(beg, end, old_mid, new_mid)
380 #define ADDRESS_SANITIZER_REDZONE(name) static_assert(true, "")
381 #endif  // ADDRESS_SANITIZER
382
383 /* Undefine the macros intended only in this file. */
384 #undef ANNOTALYSIS_ENABLED
385 #undef ANNOTATIONS_ENABLED
386 #undef ATTRIBUTE_IGNORE_READS_BEGIN
387 #undef ATTRIBUTE_IGNORE_READS_END
388
389 #endif  /* ABSL_BASE_DYNAMIC_ANNOTATIONS_H_ */